Notranji ejektor »VR«, velikost šobe 0.9 mm slika

* slike so simbolične

Notranji ejektor »VR«, velikost šobe 0.9 mm

SKU: 108375RIE
EAN: 4047322198974

Inline ejector »VR«, Nozzle size 0.9 mm, Compressed air connection G 1/4 IT, Vacuum connection G 1/8 IT, PN max. 5 bar

For vacuum generation directly at the point of use.

For direct installation between the suction pad and the compressed air supply.

Purely pneumatic vacuum generator that operates on the Venturi principle. Compressed air enters the ejector and flows through a nozzle. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet. This air and the driving air leave the ejector and enter the atmosphere via the exhaust air outlet.

Properties

  • Vacuum generator with a high maximum vacuum value (85%)
  • No moving parts, which means no wear and no maintenance
  • Extremely space-saving installation, ideal where space is restricted
  • Minimum compressed air consumption
  • Low noise output

Applications

  • Direct installation on the suction pad by screwing / plugging into the distribution beam
  • Handling all kinds of workpiece

Čas dobave: Predvidoma 3 - 5 dni
77,64 €
ali od 14,28 € / mesec
Izračunaj obrok
leanpay logo
Obrestno financiranje
  • 14,28 € x 6 mesecev
  • 28,24 € x 3 mesecev

Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay. Informativni izračun ne vključuje stroškov ocene tveganja.

Primerjaj z ostalimi
Šifra Velikost šobe [mm] Max. stopnja sesanja [l/min] Poraba zraka med evakuacijo [l/min] Stopnja evakuacije [%] Zaloga Cena Nakup Natisni
108375RIE 0.9 21 36 89
Čas dobave: Predvidoma 3 - 5 dni
77,64 € Natisni
108374RIE 0.7 14 21 90
Čas dobave: Predvidoma 3 - 5 dni
77,64 € Natisni

Opis

Inline ejector »VR«, Nozzle size 0.9 mm, Compressed air connection G 1/4 IT, Vacuum connection G 1/8 IT, PN max. 5 bar

For vacuum generation directly at the point of use.

For direct installation between the suction pad and the compressed air supply.

Purely pneumatic vacuum generator that operates on the Venturi principle. Compressed air enters the ejector and flows through a nozzle. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet. This air and the driving air leave the ejector and enter the atmosphere via the exhaust air outlet.

Properties

  • Vacuum generator with a high maximum vacuum value (85%)
  • No moving parts, which means no wear and no maintenance
  • Extremely space-saving installation, ideal where space is restricted
  • Minimum compressed air consumption
  • Low noise output

Applications

  • Direct installation on the suction pad by screwing / plugging into the distribution beam
  • Handling all kinds of workpiece

Tehnični podatki in specifikacije

Ohišje Anodised aluminium
Max. obratovalni tlak [bar] 5
Velikost šobe [mm] 0.9
Povezava Screw connection
Dovod stisnjenega zraka G 1/4 female
Dovod vakuuma G 1/8 female
Izpust izpušnega zraka M5 male
Sistem šobe Brass
Stopnja evakuacije [%] 89
Max. stopnja sesanja [l/min] 21
Poraba zraka med evakuacijo [l/min] 36
Dolžina [mm] 35.0
Teža [g] 15.0