In-line Tlačni reg.2 x IT, G 1/4, AF 17, prednast. na 1 bar slika
In-line Tlačni reg.2 x IT, G 1/4, AF 17, prednast. na 1 bar slika

* slike so simbolične

In-line Tlačni reg.2 x IT, G 1/4, AF 17, prednast. na 1 bar

SKU: 101494RIE
EAN: 4047322203807

Inline pressure regulator, 2 x IT, without secondary venting, G 1/4, AF 17, Working pressure (pre-set) 1 bar, PN max. 18 bar

This single-acting diaphragm regulator can be installed in any pneumatic system. Since the pressure is preset in the factory and cannot be altered, the product is also tamper-proof.

We recommend mounting the regulator directly on the tool to make sure the correct pressure is applied. In this case, the tool is never stressed by the higher pressure of the supply system and is protected against pressure fluctuations in hoses, pipes, etc.

Energy efficiency and economic efficiency can be achieved by using an inline pressure regulator.

Čas dobave: Predvidoma 3 - 5 dni
35,55 €
Primerjaj z ostalimi
Šifra Delovni tlak (prednastavitev) [bar] Pretok [l/min] Zaloga Cena Nakup Natisni
101494RIE 1 400
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni
101497RIE 4 700
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni
101498RIE 5 700
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni
101500RIE 6.5 800
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni
101496RIE 3 700
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni
101501RIE 7 800
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni
101499RIE 6 800
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni
101495RIE 2 600
Čas dobave: Predvidoma 3 - 5 dni
35,55 € Natisni

Opis

Inline pressure regulator, 2 x IT, without secondary venting, G 1/4, AF 17, Working pressure (pre-set) 1 bar, PN max. 18 bar

This single-acting diaphragm regulator can be installed in any pneumatic system. Since the pressure is preset in the factory and cannot be altered, the product is also tamper-proof.

We recommend mounting the regulator directly on the tool to make sure the correct pressure is applied. In this case, the tool is never stressed by the higher pressure of the supply system and is protected against pressure fluctuations in hoses, pipes, etc.

Energy efficiency and economic efficiency can be achieved by using an inline pressure regulator.

Tehnični podatki in specifikacije

Navoj G 1/4
Max. obratovalni tlak [bar] 18
Max. temperaturno območje [°C] 60
Ohišje Zinc
Pretok [l/min] 400
Delovni tlak (prednastavitev) [bar] 1
Notranji deli G 1/4
A [mm] 34.0
B [mm] 52.0
Serija inline
Merjenje pretoka At P1 = 12 bar and pressure drop Δp = 0.5 bar
a/f [mm] 17